iv
Safety Information
•
Except as explained in this manual, do not attempt to service Albércorp equipment
yourself. Opening the equipment may expose you to dangerous voltages. Refer
servicing beyond that described in this manual to authorized personnel.
•
Do not allow liquids or moisture to get into the equipment. If liquid does get into the
equipment, unplug it immediately and contact your nearest authorized service center
or Albércorp directly.
•
Ensure equipment is provided adequate ventilation. Do not block equipment
ventilation openings.
•
Do not exceed equipment voltage or power ratings and capabilities.
•
Make sure that equipment is properly grounded.
•
Do not let unauthorized persons operate the equipment.
•
The maximum voltage the Cellcorder can read is 16V. Do not attempt to read
Overall Volts. Use a separate meter, then enter the reading manually under the
SG/TEMP/OV mode.
•
Never let any Cellcorder metal surfaces come in contact with a battery post or
grounded rack while testing with the unit.
•
Do not attempt to read internal resistance of an open cell/module while the battery is
on-line.
