17
D
ISPLAY
A
CCOUNTS
(*)
D
ISPLAY LAST
EVENT
(*)
D
ATE AND
T
IME
C
ASH
W
ITHDRAWAL
K
EYS
WITHDRAWAL
Master key only
RESTRICTED MENU
Antenna
initialized!
To enter each of the 6 digits, make use of the UP
and DOWN buttons. When the desired character
is displayed, confirm it by the OK button.
Enter PIN
0
(**) Master can create Service and Operator
Keys; Service can create Operator Keys
(***) Reserved to Master only,
enabling Service Key only
7.3.5.4
S
ET
U
P
C
ASHLESS
(only if the ACS reader is built-in)
If the unit is equipped with the ACS reader
, it is possible to get access to useful functions:
Operation
Master Key (black)
for the owner
Service Key (white)
for the manager
Operator Key
(yellow)
1.
Inizialize Service and Operator keys
YES
YES (only Operator’s)
NO
2.
Enable white key to collect money
YES (from Menu)
NO
NO
3.
Check Accounts (totals and partials)
YES
NO
NO
4.
Check Accounts (partials only)
YES
YES
NO
5.
Print Accounts
YES
NO
NO
6.
Reset Accounts Data (all)
YES
NO
NO
7.
Reset Accounts Data (partials only)
YES
YES
NO
8.
Reset of paid residual credit
YES
YES
NO
9.
Access to (optional) manual Refill
YES
YES
NO
10. Access to automatic Refill and accounts
YES
YES
YES
11. Collect money if key is enabled and loaded
YES (max 500€)
YES (max. 200 €)
NO
The Master and Service keys allow to initialize the Operator Key from the reader.
[Whenever the Master Key or the Service Key gets access to the Accounts menu, the shown data
are automatically downloaded in the key. Each key can contain up to 10 downloaded sets.]
This menu allows to initialize the key reader. Enter the menu: the display will request to initialize
the key reader (antenna). Work out one 6 digits PIN code, write it
down and keep it in a safe place. Insert the Master key and press the
OK button: you will be prompted for entering the PIN code.
Insert the 6 digits PIN.
After entering the 6th character, the display will prompt for confirming the PIN code. Enter it again:
initialization of the key reader and of the Master Key will start. Now insert the Service key: the
machine 4-digit pin code (see section 9.3.13 Change PIN) will be
requested; enter it to get the Service key initialized.
Once the process is complete, the confirmation message appears:
To initialize the Operator key, exit the menu, put the Master key or the Service key in the reader,
and navigate the menu by + until finding R
ESTRICTED
M
ENU
: press OK, and navigate again until
I
NITIALIZE KEYS
, then press OK. Insert the Operator key and follow the instructions appearing:
Insert Service Key
(yellow)
Wait……
Remove the
initialized key
7.3.6.4
b
Restricted menu
(reserved to owners of Master Key and of Service key)
When inserting the Master or the Service key in the reader, the pushbuttons SEL 2 and OK light up
green. By touching SEL 2, it is possible to navigate the following options:
Refill Banknotes, Refill Coins, Accounts, Restricted menu, Exit.
By SEL, navigate to:
and press OK. The following functions will be available:
I
NITIALIZE
(**)
(***)
E
NABLE CASH
(*) Reserved to
Key
initialized!
Do not remove the
key
Init. Operator
Key
