Manuale istruzioni
-FKC 65 UB
01/01/19 Rev: 1.0.0
22
WARNING
The machine has been designed for being used on flat surfaces and small slopes.
The maximum slope allowed, feasible uphill both during the operating and the transfer
phases, is equal to 7% (corresponding to a ramp with an inclination of about 4°).
To cover the same ramp downhill, you need to shift into reverse, as indicated in the
following pictures, where the proper use is shown (downhill shifted into reverse) and the
misuse (downhill covered in the normal direction of travel).
The above-mentioned incorrect behaviour, because of possible surface condition (wet,
bumpy or made of low-friction material), can lead to dangerous slipping or prolonged
stopping distances, even more evident and risky in the transfer phase when the machine
is moving and the disk brush is raised from the floor.
For the same reason, the parking brake must be always engaged when you want to leave
the machine stopped on a ramp, with the same placed as in the following picture.
Summary of Contents for FKC 65 UB
