Manuale istruzioni
-FKC 65 UB
01/01/19 Rev: 1.0.0
35
14.2.6
TRAVEL DIRECTION SELECTOR (6)
The selector lets you choose the travel direction. Setting it to FW (FORWARD),
the machine moves FORWARD when the speed pedal is pressed. Setting it to BW
(BACKWARD), motion will be in reverse as soon as the pedal is pressed.
14.2.7
WATER-DETERGENT SOLUTION FLOW CONTROL
KNOB (7)
The knob controls the flow in litres/minute of the solution to the brush plate.
To increase the flow, turn the solution control knob clockwise.
To decrease flow, turn anticlockwise.
Adjustment ranges from 0 litres/minute to 3.5 litres/minute.
If the brush motor is de-activated or if the speed control pedal is in the idle position the
solution flow is automatically interrupted until the brush motor and machine motion are
resumed. This function prevents unintentional discharging of the solution tank and allows
the operator to adjust the solution flow without needing to adjust it again each time.
14.2.8
POMELLO DI CONTROLLO DOSATORE CHIMICO, solo
per versione con dotazione Ki-Do (8)
Il pomello controlla il flusso del detergente chimico che si andrà a miscelare con l'acqua
versata nel serbatoio acqua pulita, al fine di formare la soluzione detergente.
Per aumentare la percentuale del detergente chimico all'interno della soluzione acquosa,
ruotare in senso orario il pomello di controllo.
Per diminuire il flusso, ruotare in senso antiorario.
La percentuale di soluzione che si può creare va da 0% (nessuna aggiunta di detergente
chimico nel condotto che va direttamente alle spazzole), fino al 3% di volume di
detergente, rispetto al volume di acqua che viene convogliata sulle spazzole).
14.2.9
BATTERY CHARGE STATUS INDICATOR (9)
The LED display signals the battery charge status.
FOR SAFETY
Do not charge the batteries before using the machine for at least 60 minutes, in order not
to damage charging cycles. Pay attention to the battery charging operation, as explained
in the relevant paragraph 14.2.
14.2.10 HOUR COUNTER (10)
The display indicates the machine's operation hours since control unit activation
when the washer dryer was constructed. The hour counter activates at the start of
brush rotation and de-activates when they stop. Therefore machine movement
hours are actually measured.
Summary of Contents for FKC 65 UB
