Preparatory steps must be performed
by an electrician before installing
the light: see picture 1.
Make sure that the electrical system and its installation in the pool meet the requirements of the
relevant government standards or local authorities. The installation of the underwater light can only
be carried out by a qualified electrician.
•
The connection box of the low-voltage transformer for the 12V model of the light must be placed
at least 120 cm from the edge of the pool, see picture 1.
•
The light and all metal components placed 240 cm from the edge of the pool must be adequately
protected by non-flexible materials and the connections must be waterproof.
•
The mounting bracket must be properly installed in a way that the top edge of the light lens is at
least 45 cm under the water level in the pool, see picture 1.
1.
1
2
PIC. 1
3
4
8
5
6
7
1
Connecting box for the light (not included)
2
Non-flexible conduit
3
Water level
4
There must be space for the compact sealing from the plaster around the recess in the concrete.
5
120 cm min.
6
Minimum 45 cm from the water level to the top edge of the lens
7
29,6 cm
8
6,6 cm
2
/ Pool light LED-P100 (12V/8W)
