3
–3
4. MANUAL REMOTE CONTROL PANEL
Failure Signals
If the generator set fails, and stop due to this failure,the
malfunction lamp lights up because the signal comes
from the indicator of failure part and displays the
description of fault. After repairing breakdown, it
extinguish with reworking generator.
Faults, causes and explanations about the failure to
eliminate FAULT AND SOLVING PROBLEMS
(Page 6-1 and counting), please refer to.
Emergency Stop Button and DC Circuit Breaker;
Press the stop button in case of an emergency.
operation of the generator will allow the sudden stop.
After all the necessary maintenance and repairs to
equipment is connected with the generator set is done
start the generator the button by bringing to "ON"
position.
DC circuit breaker protects DC control circuits of the
generator set from short circuits. Once again, after all
necessary repairs are made to the generator set bring
the button to "ON" position.
Summary of Contents for MG 309
Page 4: ......
