31
English
5.11. Selecting the display colour
Long press the
LIGHT
button to cycle through 7 different
backlight colours.
5.12. Resetting to factory settings
To reset the device to its factory settings, proceed as follows:
•
Turn off the radio
•
Press and hold down the
VOX
button while
turning on the
radio
•
Release the button
•
The display shows
rS
and after a short time the radio
restarts with the factory settings
In most cases, the radio functions have now been restored.
6. External speaker
It is advisable to connect an external speaker depending on
the ambient noise. Typical, commercial radio speakers with
4-8 ohms impedance and a minimum power of 2-4 W can be
used.
Up to a 3 metre long cable can be used. For speakers that will
be used in a vehicle, make sure that a two-pin 3.5 mm jack is
used and that none of the speaker connections are attached to
the vehicle frame.
Summary of Contents for 12699.01
