25
2. Use the number keys to enter the channel number or monitor memory containing
the frequency you want to delete.
3. If you are deleting the frequency in a channel, press PGM.
If you are deleting the frequency in a monitor memory, press MON.
4.
Press 0, then press ENTER. The frequency is deleted.
Deleting Frequencies from All Locked-Out Channels Within a Bank
You can delete the frequencies in all locked-out channels within a bank (see "Locking
Out Channels and Frequencies" on Page 25). This lets you delete all the old or
uninteresting frequencies in channels you have locked out.
1. Press AUTO. AUTO appears.
2. Pressing AUTO key or turn TUNE knob, to select the channel bank.
3. Press and hold down ENTER, then press L/OUT.
Deleting Frequencies from All Channels Within a Bank
You can delete the frequencies in all channels within a bank. This lets you quickly
delete all frequencies from a bank if, for example, you want to use the bank to store a
different category of frequencies.
1. Press AUTO. AUTO appears.
2. Pressing AUTO key or turn TUNE knob, to select the channel bank.
3. Press and hold down ENTER, then press CL/DELAY.
SORTING FREQUENCIES WITHIN A BANK
You can sort the frequencies you have stored within a bank. The scanner moves the
frequencies into consecutive channels in numerical order, either from the lowest to
the highest frequency, or the highest to the lowest frequency. This makes it easy for
you to see the range of frequencies you found, for example, during auto store.
Notes:
l
During frequency sort, the scanner moves the frequencies it finds within the bank
from higher channels to lower, empty channels.
l
If you turn the scanner off during frequency sort, the scanner saves the portion of
the sort it completed.
