8
DIRECT/
•
-- enters a decimal point (necessary when programming frequencies), or
start a direct frequency search.
ENTER -- enters frequencies into channels.
PRI -- sets and turns on and off priority for ten priority channel.
L/OUT -- lets you lock out selected channels or frequencies.
L/O RVW -- lets you review locked-out channels or frequencies.
CL/DELAY -- clears an incorrect entry. Or, programs a 2-second delay for the
selected channel with FUNC key.
LIMIT -- sets the frequency range you want to search.
/\ /REC -- search up from the currently displayed frequency. Or, set the tape remote
channel.
\/ /SRCH -- searches down from the currently displayed frequency.
MON -- accesses the 50 monitor memories.
ATT -- turns attenuation on to reduce the scanner's sensitivity, or turns it off to
increase it.
BAND -- selects a preprogrammed search band.
AUTO -- automatically programs frequencies into channels.
AM/FM/WFM -- changes the receive mode.
TUNE -- lets you use the scanner's rotary tuner to tune through frequencies.
SCAN -- scans through the programmed channels.
MAN -- stops scanning to let you directly enter a channel number.
PGM -- programs frequencies into channels.
OFF/VOLUME -- turns the scanner on or off and adjusts the volume.
SQUELCH -- adjusts the scanner's sensitivity.
TUNING Knob -- turn to tune through channels or frequencies.
A LOOK AT THE REAR PANEL
