8
8
Operation
Before switching on
•
Turn
SQ
control left as far as possible
Switching on and adjusting volume
The on/off switch is combined in the
VR
control. To switch on:
•
Turn
VR
control from OFF position slightly right. LED display will be illuminated.
Then turn further until desired volume is reached.
Selecting the correct country code
The factory default setting and the starting country setting (after connecting to Power) can
vary depending on the sales country of this radio. Standard setting is the country setting
Switching to 80/40 channel system ( D, CZ and SK only)
80/40
This position is only allowed to be used in
Germany, Czech and Slovak
Republic
, because no other European country provides the German 80 FM
channels. (Note: In Czech Republic please use only FM and in Slovak Republic
use only CH 1-40 and 70-80 in FM)
No individual licence is necessary, but restrictions are still in force
for base
stations
in certain German border regions, where transmitting on channels 41 –
80 is not allowed or only with a special licence.
•
Switch the radio
off
•
Press
SC
button (Scan) and keep button pressed
•
Switch
on
the radio at the same time
•
Release
the button
•
Now you can
select
the country setting between
dE, EU, EC, E
and
Po
with the
UP/DN
buttons
.
•
After selection,
confirm
your choice with the
SC
button
Switching to 40 / 40 channel system
This setting is the European standard AM/FM system which allows 40 channels in AM and
40 Channels in FM as well. When this manual was issued, this system was allowed in
B, BG,
CH, D, E, EST, F, Fin, FL, GR, I, IRL, LV, NL , P, PL , RO
and
RSM.
40/40
EU
This position can be used in those countries, where already all 40 international
channels are allowed to be used in AM and FM. AM was traditionally used by CB
from the beginning in the early 60’s in USA, and it is still the preferred mode of all
truck drivers in the world. Please use this mode only in countries according to the
list in the Radio Passport, and please apply for an individual licence where
requested.
If necessary You can switch to this system any time by the above mentioned procedure.
The country setting remains in memory until you will select another country setting later.
