English
65
Lock Out Tips
If You Want to
Do This
Here’s How -
Temporary
Lock Out
While on a channel or frequency press
L/O
once.
The scanner beeps and temporarily locks out
that channel and displays “T L/O.” If the scanner
was not in Hold mode it then resumes scanning.
If the scanner was in Hold mode it does not
resume scanning until one of the following
actions is taken:
• Press
HOLD
again to release the Scan Hold
function. Scanning resumes on that bank.
• Press the bank you were scanning to
resume scanning in that bank.
• Press a different bank key to begin scanning
that new bank.
Permanent
Lock Out
While on a channel or frequency quickly press
L/O
key twice.
The scanner locks out that channel or frequency,
displays “T L/O” and then “L/O” and then
resumes scanning.
Search for
Permanently
Locked-Out
Channels or
Frequencies
The scanner does not stop on locked out
channels or frequencies while scanning; to
search for and display locked out channels or
frequencies press
HOLD
then use
UP
or
DOWN
to search manually through the bank. “L/O”
appears on the screen to indicate the lock out.
