English
77
Select the desired band plan with
or
Press
PROG
to store the band plan
The Scanner will display the clock and can be switched on as normal.
Please note that any Band Plan change will modify the factory preset channel steps
settings of all bands and the memory contents of the EMG band between (German)
Band Plan 2
and UK / International settings of
Band Plan 1
.
Memory Reset
For the case that it should be necessary to initialize the memory channels to factory
setting:
switch scanner off and disconnect DC cable from power
press and hold
L/O
and
PROG
, keep them pressed and re-connect the
power cable again.
Scanner will show
“Clear” while resetting the memories.
Note:
This reset will keep the Band Plan as selected.
