English
68
Setting Close Call (C-C) band Options
Use this menu to select which bands get
Close Call
checks:
Band
Name
Frequency (MHz)
b1 Lo
VHF Low Band
25.0000 - 87.2950
b2 Air
AIR Band
108.0000 - 136.9916
b3 Hi
VHF High Band
137.0000 - 174.0000
b4 UHF
UHF Band
406.0000 - 512.0000
b5 800
800MHz Band
806.0000 - 960.0000
1. From Step 4 previously select
C-C band
. The first band selection displays:
2. Scroll up or down to select bands for
Close Call
to monitor. Press
PROG
. The
screen displays that selection and “
On
”.
You cannot turn off all bands. If you turn off all bands b1 Lo (VHF Low Band) is
automatically set to ON.
Setting Close Call (C-C) alert - Options
This menu controls whether the scanner will send an alert tone when a Close Call
signal is detected. The options are:
•
- Scanner beeps when a
Close Call
signal is found.
•
- Scanner does not beep when a Close Call signal is found