13
Deutsch
4.5. Create Tourist Groups / Manage the Receivers
(only for Tourist Guide Transmitter ATT400 available)
Before you start using the receivers and transmitter, you will have to create a group of units.
Therefore turn on all units you want to be in one group. Select a channel which is currently not used
(for example if you have several tourist groups in a Museum) on the
ATT400 transceiver
.
Make sure that all receivers
of your group are within the
range of 150m. Then press
and hold the function button
“
CONF.
” for 5 seconds on the
transceiver. The channel of all
receiver units will automatically
change to the same channel
as selected on the transceiver.
All receivers are now assigned
to your group.
If one or several students
accidentally change the
channel and cannot hear the
trainer anymore, just press the
“
CONF.
” button again for 5 seconds and all receiver units are synchronised to your channel again.
Notice:
• All receivers which are once assigned to a group, can only be managed by its original
transmitter. Management function of other transmitters will not affect these units.
• DO NOT use the same channel for different groups at the same place and the same time..
