28
particular channel depending on the TV model.
3. Make sure the main unit is powered on.
Two ways to initiate the TV output after the connection is
complete:
1. Go to “TV OUT” menu and select TV Out. After that you have to
select if you want to use CVBS or YPbPr. And at last you have
to select between PAL and NTSC. If you are using the TV in
Europe then your TV is most likely supporting PAL. When you
have activated the TV-Out the display on the DR-800 will shut
down and you will see the display on your TV.
2. On the second time you want to enable the TV-Out you can
repeat the procedure from step 1 or you just press the LCD/TV
button on the remote control.
Now you can enjoy the video, audio and picture files from the
main unit projected on your TV screen!