29
6 Other Settings
Select “Settings” menu and choose the following options.
6.1 Language:
Press
UP/DOWN
on the remote control to choose the language,
and press
ENTER
to save the changes. The change will take
effect immediately after going back to the Main Menu or other
interfaces.
6.2 Network Setup:
(Also see section 4.2)
6.2.1 Wi-Fi Setup:
You will see the three options here:
A. Auto Search:
Auto Search
for Wi-Fi connections available.
B. Manual:
Here you can enter
the settings for a network manually.
C. Saved Networks:
Check
and Manage all saved networks you used before. The DR 800 will
automatically connect to one of those networks as soon as they
are available.
6.2.2 Network Type:
1) Static IP 2) DHCP 3) PPoE
6.2.3 Network Status:
Information contains IP address, Mask, Route and DNS to
determine if the system is Wi-Fi connected.
6.3 Alarm:
Please refer to the information provided in section 4.10
6.4 Key Tone Setting:
Tone On – turns the tones on, and then you can select out of 5
