Advanced Mode
As per above, but with additional functions: hold
MON
- +
SCAN
-
buttons
and simultaneously turn on the radio.
Display
Functions
Setting
Change CTCSS-tone
1 to 50, Off
Change DCS-tone
1 to 104, Off
Set Scan Pause Timer
1,2,3,5,10,15,20,30,
45,60,Off
Set voice control (VOX)
1 to 5, Off
Set
B
usy Channel
L
ockout
Carrier,CT, DT,Off
Set Priority Channel
1 to 8
Set Priority Scan Time
1 to 5, Off
Set Dual Watch mode
1 to 8, Off
Activate Roger Beep
On, Off
Activate Key Beep
On, Off
Set Time-Out-Timer
15,30,45,60,90,120,180
,240,Off
Change Call Alert tone
1 to 5, Off
Set Clone parameters
Send, Receive, Off
Change Squelch Level
1 to 15, Auto, Off
Change output power
Shortly press
PTT
+ simultaneously
UP
or
DOWN
to change output power to HI
(high) or LO (low).
Busy Lock Out (BL) mode (lock channel when busy)
(only in advance mode) BL-Modus avoids transmission when a signal is received.
Besides
oFF
you can set:
a. Carrier only (CA)
(regardless of the subtone)
Transmission is blocked as long as a signal is received on the same channel, regardless of
the subtone used.
