8
•
The CTCSS subcode (
01-38
) will be displayed on the LCD
panel if the CTCSS tone frequency function is enabled (not
oF
).
Channel Selection
•
From standby mode, press the MODE button once; the channel
number flashes.
•
Press the Up or down button briefly to move to the desired
channel number.
•
Press the
PTT
button momentarily to confirm selection.
CTCSS Mode (Sub-Code) Selection
•
From standby mode, press the MODE Button twice; a flashing
oF
or sub-code number is displayed.
•
Press the Up or Down button to select the desired sub-code for
use (
01-38
).
•
Press the PTT button to confirm selection.
•
The CTCSS mode can be turned off by selecting
oF
as the
setting.
NOTE :
To communicate with other PMR radios, all radios in Your
network must be switched to the same channel and CTCSS
subcode. To communicate with other PMR units that do not have
subcodes, switch your unit to the same channel with the subcode
set to
oF
. The CTCSS subcodes do not prevent others from
hearing your transmissions. This will only allow you to ignore all
traffic on a given channel not using the same subcode.
VOX Mode Selection
When your voice or signal is detected using the internal or external
microphone/headset the radio transmits automatically without the
need to press the PTT button.
Note:
Not all available external
microphone/headsets on the market are designed to be used under
VOX control and PTT as well!
