22
ADMIN PASSWORD
This is the password for entering camera advanced setting section and by default the password is
123456.
This password can have absolute control over the detail settings. It is required to enter this
password everytime accessing the camera advanced setting. If you have multiple cameras register
to the app, each camera can have its own admin password.
DEVICE SECURITY CODE
The code required for app to remotely connect and operate the camera. The default security code
is 123456. When setup the camera, the APP will ask you to change the default security code.
This password can have access to view and operate the camera.
It is not required to enter the security code everytime accessing the camera(s). The camera security
code is saved to the app (see page-12, camera setting).
If you have multiple cameras registered to the app, each can have
its own security code.
1. Type in the old password.
Note:
If you forget the admin password, MUST reset the camera default security code (Please
refer to page-6). After reset the camera setting, which will be erased and restored to
factory default. You will need to reconfigure all settings.
iOS
Android
