Please note offsets are required on some channels.
e.g. Broadcaster Nine Metro requires
191.625 MHz therefore set offset to + 1/6.
For offset values look at table below to give you
the decimal Australian offsets.
Use the left and right arrows
to change to the offset required.
Fraction
Offset
Decimal
Offsets
+ 1 / 6
+0.125
+ 2 / 6
+0.375
+ 3 / 6
+0.50
- 1 / 6
- 0.125
- 2 / 6
- 0.375
- 3 / 6
- 0.50
(- -/-)
0
Press transmit
to send the information then press down arrow
to get to the next
screen below
NB. Bandwidth setting for Australia MUST ALWAYS be set to 7MHz.
Change by using the left/right
arrows to 7MHz and then press transmit
. Then
press the down arrow
. You will be taken to the
“Program List selection” screen
which
enables you to program you wish transmodulate
By selecting Programs List on the PS Programmer, using left
and
right arrows, you
will be able to move through the program list shown on the on screen display (
OSD
). This way,
the program shaded is selected, the shadowed program will be the selected one and it could
be watched behind the OSD menu. You must be tuned into the output channel via the
spectrum analyser or a TV monitor.
NB. The handheld programmer PS-003 does not show the program pick
list.
