Using your telephone - OXO Connect
8AL90391ENAAed01
27 /85
3.2 OXO Connect
This section describes how to use your telephone connected to OXO Connect. Some features are subject
to programming and are marked by an asterisk (*). If necessary, contact the administrator of the system.
3.2.1 Making a call
Use one of the following:
Dial directly the number for your call.
Dial.
The call is automatically started when number is entered.
Only the 8168s WLAN Handset permits hands-free mode.
End the call:
You are in communication.
Hang up.
To make an external call, dial the outside line access code before dialing your contact number.
3.2.2 Answer an incoming call
A ring signal, a vibrating alert, or both can indicate an incoming call. The ring signal and vibration can be
disabled. The handset number and name of the caller are displayed. The name is only displayed if the
caller’s handset number is stored in the local phonebook.
You are receiving a call.
Press the off hook key.
Press the OK key.
3.2.3 Making calls by name (company directory)
Use one of the following:
Long press on the # key.
Menu
→
Dial by
name
Select the menu:
Dial by name
.
Enter the first letters of your contact's name.
You enter your contact 's name in predictive text mode. In this mode, enter each
letter of the name by pressing only once on the key with this letter.
Select the contact to call. Press the OK key to validate your choice.
Use one of the following:
Press the 'take the call' key.
OK
Select the softkey:
OK
.
Press the OK key.
