Cable connections
Overview
This test checks the correct cable installation. The cables mentioned below must be
connected for a proper system working. All the other cables are optional depending on the
used option cards and external equipment.
Checks
Check that the following cables are connected:
•
Unit power cables
•
Grounding cables
•
Fan power cables (if fan unit is available)
•
Fan alarm cables (if fan unit is available)
•
MDI/MDO cable (optional)
•
Timing cable (optional)
•
EOW cables (optional)
•
Tributary cables (optional)
•
Fiber cables (optional)
Physical and power installation exit checklist
Checklist
Verify that all procedures described below has been completed. If a procedure was not
applicable, indicate “/A”.
Procedure
Result
(Passed, Failed, N/A)
Initials
Notes
Optional card mounting (incl.
labels)
EMC bracket mounting
AMC unit mounting
Fan unit mounting
AMC unit power cabling
Ground cabling
Fan power cabling
Fan alarm cabling
MDI/MDO cabling
Timing output cabling
Powering
Physical installation check
Cable connections
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
5-6
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
365-313-103R8.0
Issue 2
July 2009