NE login procedure
Overview
This section describes the login procedure to an E.
Before you begin
Before starting the application, ITM-CIT, and login to an E, make sure that
•
the PC is connected to the E (see section
“Connecting the ITM-CIT to the E”
•
the PC is rebooted at least once after software installation.
Initial login procedure
Complete the following steps to login to an E:
...................................................................................................................................................................................................
1
Start the ITM-CIT application.
Result:
The main ITM-CIT window appears.
...................................................................................................................................................................................................
2
Select
File → NE Login → Login
in the main menu.
Result:
The
E Login
window appears.
...................................................................................................................................................................................................
3
Select the correct
COM port.
Usually, this is COM1.
...................................................................................................................................................................................................
4
Select
Edit
to set the correct baudrate.
1645 AMC operates on a baudrate of 115k.
...................................................................................................................................................................................................
5
Select
Login
.
Result:
The
Password Required
window appears.
...................................................................................................................................................................................................
6
Select the user role from the capability field.
Selectable user roles are:
•
Admin (for ITM-CIT administration and configuration of an E)
•
Config (to configure an E)
•
View (only to view E configuration).
Fill in the required password (if configured) and click
OK
.
ITM-CIT installation and NE provisioning
Software installation
NE login procedure
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
6-12
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
365-313-103R8.0
Issue 2
July 2009