OTES:
•
Please note that Alcatel-Lucent warranty is contingent upon the use of
Alcatel-Lucent specified SFPs for the 1645 AMC. Use of other SFPs is not
approved by Alcatel-Lucent and is fully at the customer's own risk. Any
warranty obligation of Alcatel-Lucent is extinguished when
non-Alcatel-Lucent specified SFPs are used.
•
It is not mandatory to have an LBO (Lightguide Build-Out) between the SFP and the
connected optical cable. However, in the case of measurements with optical loops
and/or connecting power meters an LBO (15 dB) can be required. An LBO can also
be necessary to ensure the correct input power (see chapter 8, section
•
If no SFPs are used, the optical/electrical line interfaces must be equipped with “Dust
Plugs” (LP: 700159437) to prevent dust and EMC emission. The dust plugs are part
of the 1645 AMC delivery.
Figure 2-2 Optical SFP module
Figure 2-3 SFP155E module
General information
Hardware description
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
2-6
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
365-313-103R8.0
Issue 2
July 2009
