,VVXH 0D\
To configure the wireless LAN settings enable the WiFi function first. Select from the
pull-down menu
(QDEOH
(Enable/Disable).
Set a appropriate value for the
7[3RZHU
capability (ranges 1-100%).
This parameter allow you to manage your transmission power consumption.
Specify the
5DGLR0RGH
.
Select from the pull-down menu the wireless mode one of following options: b/g mix, b or
g only.
Specify the
&KDQQHO
.
Select the appropriate channel to be used among your Access Points and your client
devices. Default is channel 6. When you select
$XWR
your Access Point will select the
channel with the lowest amount of wireless interference while the system is powering up.
The
$XWRFKDQQHOVHOHFW
start when you click
$SSO\&KDQJHV
button, it take several
seconds to scan through all the channels to find the best channel.
Specify the
%HDFRQ3HULRG
. This is optional.
This value indicates the frequency interval of the beacon. This is a packet broadcast by the
Access Point to keep the network synchronized.
Specify the
'7,03HULRG
. This is optional.
This value indicates the interval of the Delivery Traffic Indication Message (DTIM). A
DTIM field is a countdown field informing clients of the next window for listening to
broadcast and multicast messages.
Enter the
'+&36WDUW,3$GGUHVV
.
This specifies the starting IP address for DHCP users, which has 192.168.2.10 as default
value.
Enter the
66,'
.
The SSID is the unique name shared among all devices in a wireless network. It is case
sensitive, must not exceed 32 alphanumeric characters, and may be any keyboard
character. Make sure that this setting is the same for all devices in your wireless network.
