Accessories
8AL90339ENADed01
106 /119
Wall mounting kit
8068s, 8058s, 8028s Premium DeskPhone
1.
Rotate the metal foot to flat.
2.
Remove the rubber cover on phone
back shell each side.
1.
Drill two holes on the wall
(separation=90mm, diameter=6mm).
2.
Insert the fastener into the holes on wall
(P/N: 1AD007550003).
3.
Fix the support with both screws and
adjust (P/N: 1 1AD007460003). The support is
used as a reference and must be removeable.
1.
Put the support on the back side of the
phone.
2.
Slide it to top side and make sure the 4
hooks hold the metal foot.
3.
Attach the magnetic alphabetic keyboard
to the metal foot.
4.
Push on the two corners of mini-keyboard
to fix it in the support.
1.
Fix the support with the phone by 1 screw
(P/N: 1AD100020003).
2.
Connect cables through the hole on
support left side or right side.
To connect ethernet, use RJ45 cable (P/N:
1AB045210162).
To connect the power, use extension cable (P/N:
1AB203010001).
1.
Hang the assembled phone with support
on the wall.