background image

30

Compliance

howtoc

Independently of the legal warranty that covers this appliance, it is guaranteed for 1 year, 
parts and labour, counting from the date indicated on your invoice.
The invoice will be demanded if making a claim under the warranty. The warranty does not 
however confirm in the following cases: in the event of use that does not comply with the 
instructions given in this user’s manual, faults or damage caused by natural wear, damage 
resulting from a cause external to the appliance (e.g. impact, fall, exposure to dampness, 
etc.), noncompliant installation or modifications or repairs carried out by people who are 
not approved by the manufacturer or retailer.

Warning: never place your telephone in contact with water. To clean your telephone, you 
may however use a damp soft cloth. Never use solvents (trichlorethylene, acetone, etc.) 
which may damage the plastic parts of your telephone. Never spray it with cleaning 
products.
To avoid accidentally damaging the set telephone line connector, make sure you position 
the cord correctly in the compartment intended for this purpose.
The ear piece and microphone area of the handset may attract metallic objects that may 
be dangerous for the ear.

The wording is not contractual and may be subject to change. Some features of your 
telephone are controlled by a software key and the configuration of the unit.

Declaration of compliance

EC countries: we, 

Alcatel-Lucent Enterprise

, declare that the Alcatel-Lucent IP Touch 

4008/

4018 and 4019 Digital Phone products comply with the essential demands of Directive 

1999/5/CE of the European Parliament and Council. A copy of the original of this 
declaration of compliance can be obtained from your installer.

Information relative to the environment

This symbol indicates that at the end of its life, this product should be subject 
to special collection and disposal in member countries of the European 
Union, as well as in Norway and Switzerland. By ensuring this product is 
disposed of correctly, you will help to conserve natural resources and help 
prevent potential negative consequences to the environment and human 
health which could otherwise be caused by inappropriate disposal of this 

product. For further details about recycling this product, please contact the supplier who 
sold you the product.

Alcatel-Lucent Enterprise, in keeping with its policy of constant product improvement for 
the customer, reserves the right to modify product specifications without prior notice. 
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-
Lucent. All other trademarks are the property of their respective owners. The information 
presented is subject to change without notice.
Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. 
Copyright © 200

8

 Alcatel-Lucent. All rights reserved. 

MU1900

8

USA

C

-E

9

00ed01-

0843

Summary of Contents for ENTERPRISE 4018































Reviews: