Alcatel-Lucent OmniAccess 5510 ADSL Reference Manual Download

Page: 688 / 792

Telephony Services

Left running head:
Chapter name (automatic)

660

Beta

OmniAccess 5510 Unified Services Gateway CLI Command Reference Guide

Alcatel-Lucent

TELEPHONY

IDENTITY

ADDRESS

telephony-identity address

client-ip-address

name

client-

user-name

> [

vrf

vrf-name

ESCRIPTION

This command is entered in the Telephony Service Configuration Mode. This
command is used to configure the IP address and name of a telephony client.

ARAMETERS

Note:

Configuring VRF is mandatory if the WAN link is associated to a VRF.

Supports single VRF configuration across voice feature.

The VRF being configured should be the one, which is configured on the WAN link. If
the VRF is not specified, then the Default VRF is applied.

EFAULT

ALUE

None.

XAMPLE

ALU(telephony-service)# telephony-identity address 3.3.3.50

name 2000

Parameter

Description

client-ip-address

IP address of the telephony client.

The telephony client IP address should exist
within the local network.

client-user-name

Name of the telephony client.

The telephony client name can be a
maximum of 8 alphanumeric characters.

vrf-name

Name of the VRF.

Summary of Contents for OmniAccess 5510 ADSL

























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5510 ADSL

Reviews:

Related manuals for OmniAccess 5510 ADSL

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5510 ADSL, Reference Manual

Search results

Summary of Contents for OmniAccess 5510 ADSL

Reviews:

Related manuals for OmniAccess 5510 ADSL

Brands by name

Popular brands