Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 104 / 360

Configure

Left running head:
Chapter name (automatic)

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Alcatel-Lucent

Step 6:

Associate a VRF to the static route. Select the VRF to be associated from

the VRF list. The selected VRF is displayed in the

VRF

field.

Note:

If you do not associate a VRF to the route, by default, ‘Default VRF’ will be associated
to the route.

Step 7:

Click

Apply

to add a new static route or click

Cancel

to cancel the

operation.

DIT

TATIC

OUTE

Select the

Default

Select VRF

radio button. Based on the selection, the static

routes associated to the default VRF or the VRF selected from the list is displayed
in the

Static Route Details

page.

Under

Action

column, click

Edit

icon against the static route that needs to be

edited. Only the Administrative Distance can be edited.

Enter the new administrative distance in the

Administrative Distance

field.

Click

Apply

to save changes, or

Cancel

to retain the original key.

ELETE

TATIC

OUTE

Select the

Default

Select VRF

radio button. Based on the selection, the static

routes associated to the default VRF or the VRF selected from the list is displayed
in the

Static Route Details

page.

Under

Action

column, click

Delete

icon against the static route to be deleted in

the

Static Route Details

page.

Confirm at the prompt to delete the static route and its details.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands