Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 109 / 360

Configure

Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

Alcatel-Lucent

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

Step 3:

Enter the name for IP Policy in the

Policy Name

field.

Step 4:

Configure a rule for the IP policy. Specify the match conditions and

forwarding action for the IP policy.

Enter the priority of the rule in the

Priority

field. This is optional.

Rule can have multiple match-lists along with the option of any/all.

Match List

Include

table displays a list of match-lists already configured in the system.

•

Select the match-list to be included from the

Available MatchList

column and

click the ‘

>’

button to move it to the

Selected MatchList

column. Select as

many match-lists from the Available MatchList column and move it to the
Selected MatchList column.

•

Select the option Any/All from the

Match

drop-down list.

•

Click

New

to configure new match-lists or if there are no match-lists

configured. The following page is displayed.

Figure 52: Policy Based Routing - Create New IP Policy - Create New Match-
list

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands