Configure
Left running head:
Chapter name (automatic)
186
Beta
Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
A
TTACH
F
IREWALL
TO
AN
I
NTERFACE
Step 1:
Select the firewall policy from the firewall list.
Step 2:
Click
Attach Interface
in the
Interface Bindings
table.
Fields to attach an interface is populated as shown below.
Figure 109: Firewall: Firewall Policy - Attach Interface
Step 3:
Select the interface from the
Interface
list
Step 4:
Select the direction
IN/OUT.
Step 5:
Click
Attach
to attach the selected interface to the firewall policy.
D
ELETING
F
IREWALL
P
OLICY
1.
Click
Delete
icon in the
Action
column against the Firewall Policy to be deleted.
2.
Confirm at the prompt to delete the selected firewall policy.
Note:
To delete the firewall policy, detach the firewall policy from the interface and/or
disassociate the DOS attack policy or time range.
E
DITING
F
IREWALL
P
OLICY
R
ULE
1.
Select the firewall policy from the Firewall Policy Name list.
Rules already configured (DOS Attack/Intrusion rules) for the selected firewall
policy is displayed in
DOS Attack Rule/Intrusion Rule Configuration
table.
2.
Click
Edit
icon in the
Action
column for the firewall policy rule to be edited.
3.
Enter the new firewall policy rule parameters in the respective
columns.
4.
Click
Apply
to save the changes or
Cancel
to retain original parameters.
