Configure
Left running head:
Chapter name (automatic)
64
Beta
Beta
OmniAccess 5740 Unified Services Gateway Web GUI Users Guide
Alcatel-Lucent
Step 3:
Configure the Secondary IP address for the tunnel interface in the
Secondary Address
box.
Click
New Secondary Address
to add a new secondary address to the selected
interface. Fields to enter the IP address is populated.
1.
Enter the secondary IP address and subnet mask for the interface in the
IP
Address
and
Mask
column.
2.
Click
Apply
to add the secondary IP address, or click
Cancel
to cancel adding
secondary IP address.
3.
Click
Delete
icon in the Action column to delete the secondary address.
Step 4:
Enter the tunnel source and tunnel destination information in the
Advanced
box.
•
Enter the tunnel source information in the
Tunnel Source
box.
i. Enter the source IP address of the tunnel interface in the
IP Address
field or
Select the interface that the tunnel will use from the
Interface
list.
Note:
The source IP address of the tunnel must be of either a loopback interface or one of
the physical interfaces. Ensure that the interface is reachable from the other end of
the tunnel.
•
Enter the destination IP address of the tunnel at the remote end in the
Tunnel
Destination
box. This is the source interface from the point of view of the other
end of the tunnel. This can either be an IP address or fully qualified domain name
(FQDN).
i. Enter the IP address in the
IP Address
field. Ensure that this address is
reachable using the ping command; else, the tunnel will not be created
properly.
ii. Enter the FQDN of the tunnel at the remote end in the
Domain Name
field.
Step 5:
Click
Apply
to configure the tunnel interface or click
Cancel
to cancel the
operation.
D
ELETE
T
UNNEL
I
NTERFACE
1.
In the
Interfaces
page, click
Delete
icon in the
Action
column against the tunnel
that is to be deleted.
2.
Confirm at the prompt to delete the tunnel.
