Alcatel-Lucent OmniAccess 5740 User Manual Download

Page: 93 / 360

Configure

Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)

Alcatel-Lucent

Beta

OmniAccess 5740 Unified Services Gateway Web GUI Users Guide

ONFIGURE

OST

OOL

This allows you to statically bind an IP address with a hardware (MAC) address.
The IP address should exist within the configured network range.

In the

Add DHCP Pool

window, enter the name for the DHCP pool in the

DHCP

Pool Name

field.

Select the VRF check box, and select the

VRF

from the drop-down list. If the VRF

name is specified, it configures the DHCP pool in the specified VRF. If the VRF is
not specified, the pool is configured for the Default VRF.

Under the pool type, select

Host

radio button.

Figure 42: DHCP Server - Add DHCP Pool - Host

Enter the host IP address (that exists within a configured network pool) in the

Address

field.

Enter the hardware address of the host in the

Hardware Address

field.

Click

to save or click

Cancel

to cancel the operation.

Summary of Contents for OmniAccess 5740









































































































































































































































































































































































Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands

Alcatel-Lucent OmniAccess 5740, User Manual

Search results

Summary of Contents for OmniAccess 5740

Reviews:

Related manuals for OmniAccess 5740

Brands by name

Popular brands