Chassis Management and Fabric Modules
Monitoring CMM Modules
OmniSwitch 10K Hardware Users Guide
August 2015
page 3-13
The
show hardware info
command displays the following information:
•
CPU type
•
Flash manufacturer and flash size
•
RAM manufacturer and RAM size
•
NVRAM battery status
•
Jumper settings
•
BootROM and Miniboot versions
•
FPGA version(s)
For detailed information on the
show hardware info
command, including output table descriptions, refer
to the
OmniSwitch
CLI Reference Guide
.
Operating Status of CMM-Related Components
The CMM contains the switch’s temperature sensor and monitors fan operation. If the TEMP or FAN
LEDs on the CMM’s front panel indicate an error, you can use the
show temperature
and
show fan
commands to access additional status information.
For information on reading temperature and fan status LEDs, refer to
page 3-4
.
For information on using the
show temperature
and
show fan
commands, as well as information on
temperature management and fan maintenance, refer to
Chapter 2, “Chassis and Power Supplies.”
