77/314
3CC08991ATAA TQ BJA 01
Issue 01 -- March 2004
Position of catch for F < 20 GHz for
ODU from 94xxUXR201 to 94xxUXR203
Position of catch for F > 20
GHz
for
ODU
from
94xxUXR201 to 94xxUXR203
Catch bead
Support plate A
--
Reposition the solar shield via the back of the ODU from 94xxUXR201 to 94xxUXR203, centre the
bottom ribs of the solar shield in the “grooves” of the ODU. Slide fully home, and moderately tighten
by hand the screw (M6) in the recess on the underside of the ODU. Check the assembly by trying to
extract the solar shield from its recess.
Note: The locking screw is not a fixing, it is simply intended to safeguard against inadvertent dismantling; do
not overtighten.
CAUTION: If the screw cannot be reached by hand, use a 16 mm flat wrench (as an
indication, fasten to a torque of 1mN, that is 0.1mdaN).
REMINDER:
S
The ODU/antenna assembly requires no additional seal on the flanges; the two ends are
smooth. Sealing is provided by the O--ring seal around the male “noses”.
S
When the ODU is fitted, the polarization of the antenna can be ascertained from the position of the
ODU handle:
handle arranged vertically = horizontal polarization, and vice versa.
Two choices per polarization are possible:
Vertical polarization
Horizontal polarization
OR
OR
N
N
N
N
Figure 26 - Installing the ODU 94xxUXR201 to 94xxUXR203
3.5.3.2 -- Installing the flat ODU
--
Remove the solar shield by undoing the M6 fixing screw with a 16 mm flat wrench.
--
Take the ODU by the handle, offer up the two protrusion bosses inside the “nose” of the unit to the two
grooves in the “nose” of the antenna (the ODU-IDU connecting cable entry should be located in the
bottom part of the ODU). Still holding the ODU, engage without fastening the top catch on the support,
begin by fastening the two side catches on the support, then fasten the bottom catch, and finish with
the top catch.
Summary of Contents for 9400 UX
