Page 8
To wall mount the telephone set,
remove, reverse and reinsert
the
mounting
peg as
shown in the figure below.
Drill two horizontal holes
of 6mm diameter with
86mm apart. Insert two wall plugs and
screws (3.5mm diameter and 25mm long)
leaving the screw head protruded
. Place the
cord in the slot under the base
and
hang the telephone on
to
the screws
.
Wall mounted position
Horizontal position
7
2.3
WALL MOUNTING
2.2
CONNECTING THE BASE
Connect one end of the telephone cable to the socket on the back left-hand side
of the base
(C)
.
C
D
NOTE: The other socket
(D)
is for connecting a modem.