background image

16

6. TROUBLESHOOTING

If a problem arises, try this first: remove the batteries from your handset and disconnect the power supply
from the base. Wait about 1 minute then reconnect the power supply to the base; reinstall the batteries
in the handset.

However, if the problem persists, you can call the hotline on the following number: 

from

Monday to Saturday, from 8 a.m. to 7 p.m (call billed at current rates).

The store where you bought your telephone is also able to inform you and provide after-sales service.

02 07 867 00 16

Problems

Causes

Solutions

The appliance is receiving no
power.

Check the power supply connection.

Nothing appears on the handset
display.

The batteries are flat.

Put the handset on its base to
recharge it.

You have no tone.

The handset is out of range of the
base.

Move nearer to the base.

Reception quality deteriorates
during the call.

You are out of range of the base or
in an environment subject to
interference.

Move nearer to the base.

Your correspondent can't hear you.

The mute function is active.

See the "Mute function" (Turning off
the mouthpiece) section.

The base is not receiving power.

Check the electrical power
connection.

The batteries are still flat after
several hours on charge.

The handset batteries are defective. Ask your reseller to supply you with

new batteries.

Versatis155_uk.qxd  24/01/03  14:22  Page 16

Summary of Contents for VERSATIS 155





















Reviews: