background image

14

HK-150

Series Tooling                                                                          Alcoa Fastening Systems

All Alcoa Fastening Systems tools and parts have been carefully tested and checked at the factory and
are guaranteed to be free from defects in material and workmanship, subject to the following conditions. 

A.) The tools manufactured by Alcoa Fastening Systems will be repaired free of charge or replaced at our

discretion within 90 days of sale to the first user if, upon examination at our service center, we find a
defect in material or workmanship in the hydraulic system. 

B.) The tool must be returned intact and prepaid to one of our service centers. Proof of date of sale must

accompany any tool returned. This warranty will be void if repairs have been made or attempted by
others, or if the tool has been subject to abuse, neglect, accident or improper application. 

C.) The foregoing obligation is Alcoa Fastening Systems’ sole liability under this or any implied warranty,

and no one is authorized to vary its terms or conditions.

D.) If you have any problems please contact Customer Service at the factory: (800) 278-4825.

Before returning tools to the service center, please use the operation and
maintenance tips on page 9 of this manual. If the tool continues to mal-
function call the Customer Technical Support at Alcoa Fastening Systems
(888) 482-5435 for additional assistance.

A

A

UTHORIZED

UTHORIZED

 T

 T

OOL

OOL

 S

 S

ERVICE

ERVICE

 C

 C

ENTER

ENTER

:

:

90 D

90 D

AY

AY

 W

 W

ARRANTY

ARRANTY

 

 

ON

ON

 HK-150 R

 HK-150 R

IVETER

IVETER

Central Fastening Systems

801 McCann Road
Rogers, AR 72758
479 936 7577
888 370 1894 (Toll Free)
479 636 2119 (Fax)

Professional Tool Center

2236 S.116th Street
West Allis, WI  53227
414 321 1234
414 321 2524 (Fax)

FSI

1206 East Mac Arthur St
Sonoma, CA  95476
707 935 1170
800 344 2394 (Toll Free)
707 935 1828 (Fax)

Universal Repair Shop

1611 Boylston Avenue
Seattle, WA  98122
206 322 2726
206 322 2126 (Fax)

J.O. King

1265 Alpharetta Road 
Alpharetta, GA  30201
770 751 1875
800 241 2681 (Toll Free)
770 442 0950 (Fax)

Alcoa Fastening Systems

5436 W 78th Street 
Indianapolis, IN  46268
800 343 3633 (Toll Free)

Summary of Contents for HK-150 Series

















Reviews: