5
HK-150
Series Tooling Alcoa Fastening Systems
READ INSTRUCTIONS THOROUGHLY PRIOR TO OPERATING THE RIVETER. THIS
RIVETER IS DESIGNED FOR INTERMITTENT DUTY AND MAINTENANCE WORK ONLY.
The HK-150 is a hydraulic tool designed to set from 1/8 inch up to and including 1/4 inch diameter steel, stainless steel, alu-
minum and plastic rivets by changing only the nose piece. The HK-150 has a rated pull pressure of over 3,500 lbs and one
handed operation gives access to tight areas.
The hydraulic system is sealed, oil cannot be added. If the HK-150 should become damaged and leaks oil from the tool,
it
should be returned to an authorized service center
.
Figure 1
(3 PC.)-202929
(2 PC.)-202122
SEE PG. 5
201061
NOSE TUBE
202312
RESERVOIR SHIELD
202124
RETURN SPRING
PULLER SHAFT
JAW PUSHER
JAWS
201050
JAW HOLDER
NOSE PIECE
FULL EXTENSION
RELEASING
BUTTON
PUMP HANDLE
TOOL BODY
P
P
RINCIPLE
RINCIPLE
OF
OF
O
O
PERATION
PERATION
T
T
OOL
OOL
S
S
PECIFICATIONS
PECIFICATIONS
Operating Temperature Range:
32 ° - 125 ° F (
0
° -
51.7
°
C
)
Maximum Operating Temperature:
125 ° F (
51.7 ° C
)
STROKE
RIVET DIAMETER
RIVET MATERIALS
PULL PRESSURE
WEIGHT
5/8”
1/8”-1/4”
Stainless Steel,
3,500 lbs
28 oz
(1.58 cm)
(.32-.63 cm)
Aluminum, Plastic
(15.6 kN) (.79 kg)
