5
“13”).
NEW INCOMING CALL LED AND RINGING LED
New and ring indicator is the same LED, when a new call comes in, the LED is blinking, when a
new number has not been reviewed, the LED is blinking in 4s interval.
PREVENTING FSK MESSAGE TO AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, you can prevent real time
auto adjustment as follows:
1. In on-hook state, press and hold
ALARM
key for 3 seconds, LCD displays
DATE OFF,
2. Press
ALARM
key again, LCD displays
DATE ON
,
3. Press
SET
key to quit.
NOTE:
DATE OFF
: Does not allow real time auto adjustment
REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS
¾
Reviewing
In on-hook state, press
OUT/X
key, then repeat
OUT/X
to review
out
going numbers one by one.
¾
Calling back
1. In on-hook state, press
OUT/X
key to review the desired number, then press
H.F.
key or pick
up the handset, and the number is dialed out, or
2. Press
REDIAL
key, LCD displays
PICK UP
, press
H.F.
key or pick up the handset, the number
is dialed out.
¾
Deleting
1. In on-hook state, press
OUT/X
key to scroll to the desired number.
2. Press
DEL
key and the number is deleted, or
3. Press and hold
DEL
key for 3 seconds. All numbers will be deleted.
SETTING MENU
¾
Setting date & time
1. In on-hook state, press
SET
key, the value for the year flashes.
2. Press
UP/+
or
DOWN/-
key to edit the year.
3. Press
SET
key to confirm and enter the next value month setting.
4. Repeat the year setting step to set the month.
5. Repeat the above steps for date and time setting.
¾
Setting Local Area Code and Long Distance Code
1. After setting up the date and time, press
SET
key. LCD displays
CODE 0 ----
and the long
distance code”
0
“ flashes,
2. Press
UP/+
or
DOWN/-
key to edit the flashing code from 0 to 9.
3. Press
SET
key to confirm and enter the next flashing code setting.
Summary of Contents for AT5933
Page 1: ......
