8
SETTING PABX CODE
1. In on-hook state, press and hold
DEL
key 3 seconds to set PABX code, LCD displays
SET PCODE-
and the”
-
” flashes.
2. Press
UP/+
or
DOWN/-
key to set PABX code from 0 to 9.
3. If choose ” -”, it means no PABX code has been set.
4. Press
SET
key to confirm and quit.
HOLD ON MUSIC
¾
Hold music selection
There are 3 kinds of hold music for selection
1. At off-hook or hands free state, press
HOLD
key
2. Press
OUT/X
key to select the desired hold music. It plays the music at same time.
3.
Press
HOLD
key to quit.
¾
When talking over handset, press HOLD key to enter the hold mode and the hold music
is sent out. In hold mode
1. Press
HOLD
key to release hold mode and continue to talk over handset, or
2. Hang up handset, it enters hands-free hold mode.
¾
When talking at hands-free mode, press HOLD key to enter the hold mode and the hold
music is sent out. In hold mode
1. Pick up handset to talk over handset, or
2. Press
H.F.
key to quit hold mode and talk at hands-free mode.
ONE TOUCH MEMORY OPERATION
¾
Store the number in one-touch memory
1. Pre-dial the desired number or checking incoming and outgoing number that you want to
store.
2. Press
STORE
key
3. Press
M1
key
¾
Make a call from one-touch memory
In off-hook or on-hook situations, press
M1
key to dial the stored number out.
TWO TOUCH MEMORY OPERATION
¾
Store the number in two-touch memory
1. Pre-dial the desired number or checking incoming and outgoing number that you want to
store.
2. Press
STORE
key
3. Press one of digit
key (0-9)
¾
Make a call from two-touch memory
In off-hook or at hands-free state, press
STORE
key + digit key (0-9) key, the relevant number will
Summary of Contents for AT5933
Page 1: ......
