B
U
EFORE SING
7
Menu
22
The PIN is required for the following
options: Registering a new handset,
Resetting a handset and the items under
. The PIN is preset t o "0000"
at the factory.
To change the PIN code:
Some telephone s ystem requires an
access code (9, f or example) and listen
to a second dial tone before dialing an
outside number. You can set your phone
to insert one-digit access code
automatically when you use a p hone
number from your Call ID list.
1. Press the
button.
1. Press the
button.
2. Press the
o r
buttonrepeatedly
to choose
, then press
the OK button.
2. Press the
o r
buttonrepeatedly
to choose
, then press
the OK button.
Setting Access Code
Changing PIN
3. Enter the current PIN, then press the
OK button.
4. Enter a four-digit PIN you want to
use, then press the OK button.
5. Enter the new PIN again to c onfirm
the number, then press the OK
button.
3. Enter the one-digit access code
using the number keypad.
Note
4. Press the OK button tosave the
selection.
Result :
The LCD window does not
display the PIN you entered in
order to maintain secrecy. If you
enter a w rong PIN, your phone
returns to Standby mode.
: When you dial a phone number in
the Call Log list, the number will
be dialed f ollowing the access
code and a preset pause time.
When you place the handset on the
charger to charge, the handset
automatically turns on. To turn the
handset on or off in Standby mode,
follow these steps:
1. To turnon the handset when the
display is off, press the
button.
The first time you turn the phone
on, the LCD w indow displays the
handset number and the time.
The phone is i n Standby mode
and ready for use.
Result:
Turning Handset On/Off
If the time on the display is not correct,
you can change the time.See " Setting
Time " onpage 8.
2. To turn the handset off, squeeze the
button until
appears.
Thenthedisplay is turned off.
: Nothing will appear in the LCD
window when battery power is
verylow. YOU SHOULD FULLY
CHARGE THE HANDSET BEFORE
USE.
Note
：
