25
15. Dialling codes
The dialling codes for International, Country and Local in your telephone base
are preset to be EMPTY. These should be set first before you copy phone
numbers from a mobile SIM card to the ALCOM Premium Colombo Combo
phone book.
For example you can set as below if the phone is used in Singapore.
International code:
Enter your preferred operator's IDD dial out code. Some
examples are 001, 002, 008, 018, 019 and 021. Please check with your
service provider for the exact dial out codes.
Country code:
Enter 65 (this should be the country code where the phone is
used).
Local code:
Please leave it blank (Singapore does not have any local area
code).
With above settings any International phone number copied from SIM which
begins with + will be prefixed with xxx and saved to the phone book. For any
Local phone number copied from SIM which begins with +65 will be saved to
phone book without any prefix.
Note: xxx should be the IDD dial out code number which you have earlier set
as an International code.
You can change the dialling codes in your telephone base should you need to.
1. Press
« Names »
.
2. Scroll
to
« Dialling Codes »
and press
« Select »
.
3. Press
or
to select
« International »
,
« Country »
or
« Local »
and
press
« Select »
.
4. Enter the new dialling code, you can use
« Clear »
to delete any unwanted
digits and press
« Save »
.
5. Press
« Back »
twice to return to standby.
Note: To empty all dialling codes, perform a MASTER RESET from the BASE
unit (refer to page 31).
VII. Calls lists, telephone base
If you have subscribed to Caller Line Identification (CLI), and provided the
identity of the caller is not withheld, the number of the caller will be displayed
