ALDI 61755 User Manual Download

Page: 5 / 18

AFTER SALES SUPPORT



support@scheppach.com.au



1300 855 831

MODEL: AB1900 PRODUCT CODE: 61755 08/2018

AUS

Intended use/Safety Regulations

AB1900

IV. INTENDED USE

This machine is designed for heavy duty demolition and chiseling work using the

appropriate chisel.

The machine is to be used only for its prescribed purpose. Any other use is

deemed to be a case of misuse. The user / operator and not the manufacturer will

be liable for any damage or injuries of any kind caused as a result of this.

Please note that our equipment has not been designed for use in commercial, trade

or industrial applications. Our warranty will be voided if the machine is used in com-

mercial, trade or industrial businesses or for equivalent purposes.

V. SAFETY REGULATIONS

WARNING Read all safety warnings and all instructions. F

ailure to follow

the warnings and instructions may result in electric shock, fire and/or serious in

jury.

Save all warnings and instructions for future reference

The term "power

tool" in the warnings refers to your mains-operated (corded) power tool or bat-

tery-operated (cordless) power tool.

WORK AREA SAFETY

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the pres-

ence of flammable liquids, gases or dust.

Power tools create sparks which

may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool.

Distrac-

tions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools. Unmodified

plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radi-

ators, ranges and refrigerators.

There is an increased risk of electric shock if

your body is earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power

tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplug-

ging the power tool. Keep cord away from heat, oil, sharp edges or moving

Summary of Contents for 61755



















Search results

Summary of Contents for 61755

Reviews:

Related manuals for 61755

Brands by name

Popular brands

ALDI 61755, User Manual

Search results

Summary of Contents for 61755

Reviews:

Related manuals for 61755

Brands by name

Popular brands