ALDI 61755 User Manual Download

Page: 7 / 18

AFTER SALES SUPPORT



support@scheppach.com.au



1300 855 831

MODEL: AB1900 PRODUCT CODE: 61755 08/2018

AUS

Safety regulations

AB1900

Disconnect the plug from the power source and/or the battery pack from

the power tool before making any adjustments, changing accessories, or

storing power tools.

Such preventive safety measures reduce the risk of start-

ing the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power

tool.

Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tools

operation. If damaged, have the power tool repaired before use.

Many acci-

dents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed.

Use of the power tool for operations different from those intended

could result in a hazardous situation.

SERVICE

Have your power tool serviced by a qualified repair person using only iden

tical replacement parts.

This will ensure that the safety of the power tool is

maintained.

RECOMMENDATION

We recommend that the tool always be supplied via residual current device with
a rated residual current of 30 mA or less.

ADDITIONAL SAFETY INSTRUCTIONS

•

Wear ear protectors.

Exposure to noise can cause hearing loss

•

Use the Auxiliary handles supplied with the tool

. Losing control of the tool can

cause injuries.

•

Hold the equipment by the insulated handles when carrying out work during

which the plug-in tool could strike concealed power cables or its own mains

lead

. Contact with a live cable can also make the metal parts of the equipment live

and will cause an electric shock.

Important!

When using equipment, a few safety precautions must be observed to avoid injuries

and damage. Please read the complete operating manual with due care. Keep this

Summary of Contents for 61755



















Search results

Summary of Contents for 61755

Reviews:

Related manuals for 61755

Brands by name

Popular brands

ALDI 61755, User Manual

Search results

Summary of Contents for 61755

Reviews:

Related manuals for 61755

Brands by name

Popular brands