ALDI 811322, User Manual

10

11

Start-up

Use

X

  Schrader valve

Y

  Dunlop valve

Z

  Presta valve

Charging the battery

(Fig. B)

NOTE!

-  The battery must be charged before 

the first use.

-  The battery must be charged as soon 

as only 1 bar is left in the battery indi-

cator 

11

.

-  The auxiliary light 

19

 (see 

Fig. L) may 

not be switched on during the charg-

ing process.

-  During the charging process with the 

USB charging cable 

3

, the product 

cannot be used for pumping for safety 

reasons. There is a risk of overheating.

Checking battery charge 

level 

(Fig. B)

1.  Switch on the product by pressing the 

on/off button   

9

. 

-  The display 

10

 switches on. The num-

ber of bars on the battery indicator 

11

,  

indicate the charge level of the battery.

-  When the battery is fully charged, 4 

bars are displayed.

!

WARNING!

Risk of injury from electric shock! 

-  Only charge the product in interi-

or spaces.

-  If the product has become wet, you 

must dry the product completely with 

a dry cloth before charging. There is a 

risk of short circuit.

NOTE!

-  The battery is fitted with an automatic 

switch-off device. This switches off the 

charging process with a 100 % charge, 

so that the battery cannot be over-

charged. 

-  It is best to charge the product every 

4 weeks to prevent the battery cells 

from discharging.

-  Only use the USB charging cable 

3

 or 

the car charger 

4

 supplied with the 

product.

-  Charge the battery only at an ambient 

temperature between 0 °C and 50 °C.

-  If the battery of your car is old, the bat-

tery should not be charged using the 

car charger 

4

. It is possible that your 

car will not start afterwards.

Charging battery with USB 

charging cable

(Fig. C)

Connect the product to an appropriate 

device 

3

 using the USB charging cable. 

You can charge the battery with a power 

adapter with USB port, please refer to the 

technical data. 

The product can only be connected to a 

control device with a SELV output and a 

maximum working peak output voltage 

(Uout) of 5 V. 

-  During the charging process, the 

charging indicator 

12

 on the USB plug 

3a

 lights up red.

-  Once the battery is fully charged, 

the charge indicator 

12

 lights up 

green.

1.  Switch off the product.

2.  Plug the charging plug 

13

 into the 

socket 

14

.

3.  Insert the USB plug 

3a

 into the charg-

ing device.

4.  When the charging process is com-

plete, remove the charging plug 

13

from the socket 

14

 and the USB plug 

3a

 from the charging device.

Charging the battery with 

the car charging adapter

(Fig. D)

!

WARNING!

Please note that while charging 

with the the car charger 

4

, the 

product should not be used for 

continuous operation in order not to 

overload the car battery and the product. 

When charging using the car charger 

4

, the charger 

4

 must always be fully in-

serted into the car’s cigarette lighter. Oth-

erwise there is a risk of fire due to over-

heating.

1.  Switch off the product.

2.  Plug the charging plug 

13

 into the 

socket 

14

.

3.  Insert the plug 

4a

 of the car charger 

4

 into the cigarette lighter socket.

4.  When the charging process is com-

plete, remove the charging plug 

13

from the socket 

14

 and the plug 

4a

from the cigarette lighter.

USE

Screw the compressed air hose with 

threaded connection 

2

 into the prod-

uct, see

 Fig. E.

Using the adapters

For car tyres - Schrader valve 

X

:

1.  First, remove the dust cap.

2.  Screw the valve adapter 

2a

 on the 

compressed air hose with threaded 

connection 

2

 to the Schrader valve 

X

, see

 Fig. F. 

For bicycle tyres with Dunlop valve 

Y

:

1.  Screw the Dunlop/Presta Valve adapt-

er 

5

 into the valve adapter 

2a

 of the 

compressed air hose with threaded 

connection 

2

. 

2.  Remove the dust cap.

3.   Screw the Dunlop/Presta Valve adapt-

er 

5

 onto the Dunlop valve 

Y

, see

Fig. G.

For bicycle tyres with Presta Valve 

Z

:

1.  Screw the Dunlop/Presta Valve adapt-

er 

5

 into the valve adapter 

2a

 of the 

compressed air hose with threaded 

connection 

2

. 

2.  Remove the dust cap.

3.  Loosen the nut of the Presta Valve 

Z

(3.a-3.c). 

4.  Screw the Dunlop/Presta Valve adapt-

er 

5

 onto the Presta Valve 

Z

, see

Fig. H.

(Valves 

X

, 

Y

, and 

Z

 not included in 

the scope of delivery)

For balls:

1.  Screw the metal adapter for balls 

6

into the valve adapter 

2a

 of the com-

pressed air hose with threaded con-

nection 

2

, see

 Fig. I. 

2.  Now, insert the metal adapter 

6

 into 

the ball.

For small volume inflatable articles:

1.  Screw the plastic adapter for inflata-

ble articles 

7

 into the valve adapter 

2a

 of the compressed air hose with 

threaded connection 

2

2.  Insert the plastic adapter for inflatable 

articles 

7

 into the inflatable article, 

see 

Fig. J.

Switching the product on/

off

!

CAUTION!

Risk of injury!

The device generates a sound 

pressure level of approx. 90 dB. 

There is a risk of hearing dam-

age!

- Wear suitable hearing protection