background image

 

Pedometer with Speed Sensor 

Safety and Servicing 

_____________________________________________________________ 

AFTER SALES SUPPORT 

 

service@produktservice.info 

 

Toll Free Number 1-800-493-9137

 

 

Remove the battery when the device is not in use for a longer period of time. 

 

Caution! There is a risk of explosion, if the battery is not changed correctly. Only 
replace the battery with one of the same or similar type. 

 

Keep the batteries and pedometer  out of reach of children. Batteries can be 
swallowed by children. Seek immediate medical attention, if this happens. 

 

Avoid contact with skin, eyes and mucous membrane if leakage occurs. Upon 
contact with battery acid rinse the affected area with plenty of water and seek 
medical help immediately. 

Non-compliance with these instructions can lead to damage and under certain 
circumstances to explosion of the batteries.  Details on how to change the batteries 
can be found under Section 6 „Battery change“. 
 

 

  Operational Environment Conditions 

2.2

The pedometer can be operated continuously at an ambient temperature of 32 °F to 
104 °F. The pedometer is protected against shocks, which may occur during normal 
wear on the belt. No evidence of condensation is allowed in a pedometer  as this 
might trigger a short circuit. The pedometer  should therefore never be exposed to 
extreme changes in temperature. The unit should never be placed near very strong 
magnet fields (e.g. electrical welding equipment, current transformers) as this could 
cause variations in the time measurement. Non-compliance with these directions can 
result in malfunction or damage of the pedometer. 
 

  Water Resistance 

2.3

The pedometer  is not water resistant. Be careful not to press the keys, when the 
pedometer  is wet. Water  can only enter the casing through the keys and damage 
the movement. 
 

  Disposal 

2.4

Dispose of the packaging in the proper manner. Batteries need to be properly 
disposed of. For this purpose, shops selling batteries provide special containers for 
environmentally-friendly disposal. Furthermore, empty batteries will be taken back at 
public waste collection points. Should you wish to dispose of the article, do so in 
accordance with the latest provisions. Details are available from your local authority.  
 

  Cleaning and Care 

2.5

Use only a soft, damp, lint-free cloth to clean the pedometer. Do not use solvents, 
abrasive or gaseous cleaning materials. Ensure that all water droplets are removed 
from the display. Water can cause permanent discolouration. Ensure that the 
pedometer display is not exposed to glaring sunlight or ultraviolet rays. 
 

  Storage 

2.6

Store the pedometer  in a cool and dry place. Once the battery has been removed, 
the pedometer can be stored at 32 °F to 122 °F. 
 

Summary of Contents for AU4-PE-3A















Reviews: