background image

 

Pedometer with Speed Sensor 

Function Keys/Modes/Setting 

_____________________________________________________________ 

AFTER SALES SUPPORT 

 

service@produktservice.info 

 

Toll Free Number 1-800-493-9137

 

           Set Time

 

Press SEL to toggle 12 or 24 hr Format, press SET to 
confirm and advance to SET hours. 
Press SEL to advance to desired hours, press SET to 
confirm and advance to set minutes. 
Press SEL to advance to desired minutes, press SET to 
confirm and advance to set weight. 

 

Set Weight and Height

 

The unit default of weight is 50KG or 110LB. 
Press SEL to advance to desired weight, press SET to 
confirm and advance to set height. 
The unit default of height is 150cm or 59inch. 
Press SEL to advance to desirable height,  press SET to 
confirm and advance to Calibration Mode. 

Note: It is necessary to enter the correct weight and height to receive a meaningful 
value of calorie consumption and fat burning. 
 

Note:

  By calibrating the pedometer  it calculates your step length for running and 

walking itself.  
It is strongly recommended that the user calibrates the pedometer  to  its  personal 
moving pattern. Otherwise this unit will use only statistical data based on the weight 
and height input by the user. The performance of the unit will not be in this full 
capacity. 

 

  Pedometer Calibration 

3.4

You can choose between YES and NO with the SEL key. Choose YES and confirm 
with the SET key or choose NO for calibrating later.  

 

The unit enters into Calibration RUNWALK mode, press SET to confirm and 
advance to SET RUNWALK Distance. 

 

Press SEL to set the run distance, increment by 100 meter (= 109,36 yards). 
Press SET to confirm the distance. Now the unit is ready for Calibration 
Running Stripe Length. The display shows “PRESS START”. Then press 
SET and start running. 

 

At the time distance covered, press SET to stop. Display “DONE and 
SAVED” appears. The calibration was correct and was saved. 

 

ATTENTION: 

You can only enter the distance for calibration in meters. 100 meters are 109,36 
yards. This means that you should walk/run a distance of 100 m resp. 109,36 yards. 
This is the usual length of a track in a stadium.  

Note:

 It is important that you also perform the calibration for walking, as described in 

the following section: 

Summary of Contents for AU4-PE-3A















Reviews: