Pedometer with Speed Sensor
Technical data
_____________________________________________________________
AFTER SALES SUPPORT
service@produktservice.info
Toll Free Number 1-800-493-9137
12
Note:
1. ODO can only be reset to zero by TOTAL RESET or battery changing.
2. To avoid ODO info lost by battery changing, user can re-enter the value in “Set
Odometer” session above.
It is not possible to switch off the pedometer. It is always switched on like an
LCD watch.
5. TECHNICAL DATA
Your pedometer has a 3 V lithium battery, type CR2032 (1 x 3 V
0.02mA
CR2032).
6. BATTERY CHANGE
Caution!
Risk of explosion with improper replacement of the battery. Replacement
only with the same or equivalent type of battery.
For battery replacement, proceed as follows:
•
Open the cover at the back of the pedometer and remove them.
•
Then, open the battery holder by carefully lifting the locking bracket over the
locking hook.
•
Remove the depleted battery and dispose of it properly and
environmentally.
•
Insert a new 3 V battery type CR2032 with the positive terminal (+) upwards
into the holder and push it until it locks in. Ensure that you pay attention to
the correct polarity.