background image

Safety

10

g) 

If there is an option for installing dust suction devices and dust 

containers, these should be attached and used correctly. 

Use of 

dust collection can reduce dust-related hazards.

h) 

Do not be lulled into a false sense of security and ignore the safety 

rules for power tools, even if you are well acquainted with power 

tools, having used them frequently. 

Using power tools without due 

care and attention can cause serious injuries in a split second.

Power tool use and care

a) 

Do not overload the power tool. Use the correct power tool for 

your application. 

The correct power tool will do the job better and 

safer at the rate for which it was designed. 

b) 

Do not use the power tool if the switch does not turn it on and 

off. 

Any power tool that cannot be controlled with the switch is dan-

gerous and must be repaired.

c) 

Disconnect the plug from the power source and/or remove the 

rechargeable battery from the power tool before making any 

adjustments, changing insertion tools or storing the power tool.

 

Such preventive safety measures reduce the risk of starting the pow-

er tool accidentally.

d) 

Store idle power tools out of the reach of children. Do not let any 

individual who is not familiar with the power tool or who has not 

read these instructions operate this power tool.

 

Power tools are 

dangerous in the hands of untrained users. 

e) 

Maintain power tools and insertion tools with care. Check for mis-

alignment or binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s operation. If any 

parts of the power tool are damaged, have them repaired before 

use.

 Many accidents are caused by poorly maintained power tools.

f) 

Keep cutting tools sharp and clean. 

Properly maintained cutting 

tools with sharp cutting edges are less likely to bind and are easier to 

control.

g) 

Use the power tool, accessories and fitted tools etc. in accordance 

with these instructions, taking into account the working con-

ditions and the work to be performed.

 

Use of the power tool for 

operations different from those intended could result in a hazardous 

situation.

Summary of Contents for FERREX FID 20-I






















Reviews: